Oven Not Heating? We'll Diagnose It on Video.
An oven that won't heat usually has a visible or audible cause. We'll identify it in a 15-minute video call.
What could be causing it
Failed bake element
Often a simple fixThe bottom element can burn out visibly — blistering, breaks, or hotspots. We'll check it on camera.
Typical cost: $100–$200
Faulty gas igniter
May need a proGas ovens use a glowing igniter to open the gas valve. If it glows but won't light, it's weak and needs replacing.
Typical cost: $100–$200
Bad oven temperature sensor
Often a simple fixIf the sensor reads wrong, the oven won't heat to the set temperature. We'll guide you through a resistance check.
Typical cost: $50–$100
Blown thermal fuse
May need a proA safety device that cuts power if the oven overheats. One-time replacement if tripped.
Typical cost: $50–$100
Control board failure
May need a proOn electronic ovens, the control board manages temperature. Error codes help us identify this.
Typical cost: $200–$400
Why video diagnosis works for this
Oven heating issues leave visual evidence. We can inspect the bake element for damage, check igniter glow strength, read error codes, and test the door seal — all through your phone camera.
What you'll get
- Diagnosis of why your oven isn't heating
- Safety check for gas models
- Parts list with part numbers
- DIY repair instructions when safe
- Written report emailed to you
What happens after your call
It's a visible element failure
We'll show you the damaged element and give you the part number. Element swaps are straightforward DIY repairs.
It's a gas igniter
Igniters should be replaced by a pro. We'll give you the part number and cost estimate.
It's the control board
We'll help you decide if the repair cost justifies fixing vs. replacing the oven.
Simple pricing
Pick your level
Both include a written report with diagnosis, parts list, and fix-vs-replace recommendation.
Diagnosis
$49
15 minutes
- Live video call with Simon's team
- Expert diagnosis of your appliance issue
- Parts list with part numbers & prices
- Fix-vs-replace recommendation
- Written report emailed to you
Best for: "Tell me what's wrong and what I need"
Guided Repair
$79
30 minutes
- Everything in Diagnosis, plus:
- Step-by-step repair walkthrough on video
- Real-time guidance as you do the repair
- Safety checks before & after
- Extended time if needed ($29/15min)
Best for: "Walk me through fixing it myself"
Can't diagnose it? You don't pay. · In SoCal? $49 credited toward in-home repair.
FAQ
Can you tell the difference between element and igniter issues on video?+
Yes. A failed bake element has visible damage. A weak gas igniter glows orange but won't open the gas valve. Both are easy to see on camera.
Is it safe to check inside my oven?+
Yes, as long as it's off and cool. We'll have you use your phone flashlight to inspect the elements and interior.
What if you can't diagnose it?+
Oven no-heat issues have visible causes — element damage, igniter glow, error codes. We identify the part on the vast majority of calls. If we can't, full refund.
Related Issues
Need in-home repair?
In SoCal? Your $49 video fee is credited toward an in-home repair.
Learn about in-home service