Available Today!•877-378-3111for Same-Day Service

5.0 rating • 1,400+ customers served

Dishwasher Not Draining Repair in Studio City

Same-day service available | $59 diagnostic — FREE with repair | 90-day warranty

90-Day Fix GuaranteeSame issue? We come back free.

✓ Same-day appointments available✓ OEM parts on truck

Studio City sits between the Santa Monica Mountains and the busy Ventura Boulevard corridor, with homes ranging from hillside mid-century gems to flat-lot ranch homes and modern infill. When it comes to dishwasher repair, a dishwasher not draining is one of the most common calls we get from homeowners here. TruePro's technicians arrive in Studio City with fully stocked vans so most repairs are completed on the first visit.

What Our Customers Say

5.0•1,400+ customers served

See reviews on Yelp →See reviews on Nextdoor →

"Diagnosed a wiring harness issue near the door hinge. Repaired the connection and cycles run fully. Professional and fairly priced."

Denise H.

Studio City

1 month ago

"Diagnosed a solenoid valve issue. Replaced the drain valve and standing water is gone. Couldn't be happier with the service."

Steve A.

Studio City

2 months ago

"Replaced a cracked tub that was leaking underneath. No more mystery puddles in the kitchen. Will definitely call them again."

Linda Z.

Studio City

3 days ago

What's Happening & What to Do Now

Common Symptoms

Standing water at bottom after cycle
Buzzing from base but no drain
Dishes stay dirty / gritty

Safe Checks You Can Try

Clean filter and check air gap
Ensure drain hose high loop is present
Run a reset per manual

Stop Using If:

you see leaking from the base or smell electrical burning

Pricing & Time to Fix

Repair Type	Price Range
Drain pump replacement	$100–$400
Drain hose / clog clear	$80–$180
Main motor & pump assembly	$350–$500

Parts + labor. Informational only—not a binding quote.

$59 diagnostic — credited toward repair if you approve.

Typical Fix Time

45–90 min

Common Parts

drain pump, drain hose, control board (rare)

$59 diagnostic — FREE with repair

Usually same‑ or next‑day service

Brands We Service

Our technicians are trained and experienced with all major appliance brands

Bosch

Whirlpool

KitchenAid

Samsung

Frigidaire

Maytag

Ready When You Need Us

Usually same‑ or next‑day service

Fast Response

Most repairs completed in a single visit

90-Day Warranty

All parts and labor covered

Upfront Pricing

Written quote before we start

Call (877) 378-3111 Text Us

Frequently Asked Questions

A clogged drain pump, a kinked drain hose, or a blocked air gap are the most common causes. Food debris and small objects frequently clog the drain pump filter. Our tech inspects the full drain path during the $59 diagnostic — waived with repair — and clears or replaces the failed component on the spot.

Yes. Use towels or a wet-dry vac to soak up the water. Then check the drain filter at the bottom of the tub — it's often accessible by hand and may have food debris blocking it. If clearing the filter doesn't solve the problem, the drain pump or hose likely needs professional attention.

It's not dangerous, but standing water will become stagnant and smelly, and the dishwasher won't clean properly if old water is sitting in the tub at the start of each cycle. The problem usually worsens over time as the clog builds, so it's best to get it fixed sooner.