5.0 rating • 1,400+ customers served
Washer Not Starting Repair in Los Angeles
Same-day service available | $59 diagnostic — FREE with repair | 90-day warranty
90-Day Fix GuaranteeSame issue? We come back free.
What Our Customers Say
5.0•1,400+ customers served
"Identified a failing control board causing random cycle stops. Replaced it same-day. Couldn't be happier with the service."
OZ
Omar Z.
Los Angeles
"Found the water inlet valve was stuck partially open. Replaced it and no more slow-fill issues. Really impressed with how fast they worked."
HN
Holly N.
Los Angeles
"Diagnosed a drive belt that had stretched and was slipping. New belt installed in 20 minutes. So glad we found them."
YF
Yolanda F.
Los Angeles
What's Happening & What to Do Now
Common Symptoms
- Lights on, no start
- Error code at start
- Door won’t lock
Safe Checks You Can Try
- Power‑cycle at breaker
- Ensure door closes firmly
Stop Using If:
you smell electrical burning
Pricing & Time to Fix
| Repair Type | Price Range |
|---|---|
| Door lock / lid switch | $120–$250 |
| Control board | $250–$500 |
Parts + labor. Informational only—not a binding quote.
$59 diagnostic — credited toward repair if you approve.
Typical Fix Time
45–120 min
Common Parts
lid switch/door lock, control board, timer
$59 diagnostic — FREE with repair
Usually same‑ or next‑day service
Brands We Service
Our technicians are trained and experienced with all major appliance brands
LG
Samsung
Whirlpool
GE
Ready When You Need Us
Usually same‑ or next‑day service
Fast Response
Most repairs completed in a single visit
90-Day Warranty
All parts and labor covered
Upfront Pricing
Written quote before we start
Frequently Asked Questions
Frequently Asked Questions
Start with the basics: make sure the outlet has power (test with a phone charger), check that the door or lid is fully closed, and try resetting the machine by unplugging it for 60 seconds. If it still won't start, the issue is usually a failed door latch, lid switch, or control board. Our $59 diagnostic covers the full electrical inspection.
Not necessarily. A failed lid switch or door latch is one of the most common reasons a washer won't start, and those parts are typically $100 to $200 installed. Control board failures cost more but aren't always the culprit. Our diagnostic fee is $59 and waived with repair, so you'll know the cost before committing.
If the control panel lights up but the machine won't begin a cycle, the problem is often the door lock mechanism, the main control board, or the motor start capacitor. Our tech tests each component to isolate the failure and gives you a flat-rate quote before starting any work.