5.0 rating • 1,400+ customers served
Range Igniter Not Working Repair in Los Angeles
Same-day service available | $59 diagnostic — FREE with repair | 90-day warranty
90-Day Fix GuaranteeSame issue? We come back free.
What Our Customers Say
5.0•1,400+ customers served
"Replaced a blown thermal fuse that was preventing the oven from turning on at all. Excellent work, very thorough."
AJ
Andre J.
Los Angeles
"Traced intermittent heating to loose wire connections at the element. Secured all terminals. So glad we found them."
PS
Priya S.
Los Angeles
"Identified a failing cooling fan causing the control panel to overheat. Replaced the fan. Couldn't be happier with the service."
HN
Holly N.
Los Angeles
What's Happening & What to Do Now
Common Symptoms
- Burner clicks but won’t light
- Weak or no spark
Safe Checks You Can Try
- Try another outlet and verify gas supply
- Clean burner caps and electrodes
Stop Using If:
you smell gas
Pricing & Time to Fix
| Repair Type | Price Range |
|---|---|
| Igniter replacement | $120–$250 |
| Spark module | $200–$400 |
Parts + labor. Informational only—not a binding quote.
$59 diagnostic — credited toward repair if you approve.
Typical Fix Time
45–120 min
Common Parts
surface burner igniters, spark module
$59 diagnostic — FREE with repair
Usually same‑ or next‑day service
Brands We Service
Our technicians are trained and experienced with all major appliance brands
GE
Whirlpool
KitchenAid
Samsung
LG
Ready When You Need Us
Usually same‑ or next‑day service
Fast Response
Most repairs completed in a single visit
90-Day Warranty
All parts and labor covered
Upfront Pricing
Written quote before we start
Frequently Asked Questions
Frequently Asked Questions
The most common causes are a clogged burner port, a wet igniter (after a spill or cleaning), or a failed spark module. Try cleaning the burner cap and ports with a pin and making sure the cap is seated properly. If it still won't light, our tech tests the spark module and gas valve during the $59 diagnostic.
A yellow flame indicates incomplete combustion, which can produce carbon monoxide. It's usually caused by clogged burner ports or a misaligned burner cap. Don't ignore it. Our tech cleans the ports, checks the air shutter adjustment, and replaces any corroded components to restore a proper blue flame.
If all burners click but none ignite, the spark module (which powers all the igniters) has likely failed, or there's a gas supply issue. Check that your gas line valve is open. If it is, the spark module probably needs replacement. Our $59 diagnostic confirms the cause — fee waived with repair.