5.0 rating • 1,400+ customers served
Dryer Not Spinning Repair in Los Angeles
Same-day service available | $59 diagnostic — FREE with repair | 90-day warranty
90-Day Fix GuaranteeSame issue? We come back free.
What Our Customers Say
5.0•1,400+ customers served
"Diagnosed a bad gas valve coil set. Replaced the coils and the dryer heats consistently again. Really impressed with how fast they worked."
LG
Luis G.
Los Angeles
"Identified a clogged moisture sensor causing the auto-dry to stop too early. Cleaned the sensor bars. Couldn't be happier with the service."
TB
Tanya B.
Los Angeles
"Replaced a faulty door switch that was cutting power mid-cycle. Professional and fairly priced."
KV
Karen V.
Los Angeles
What's Happening & What to Do Now
Common Symptoms
- Hums but drum won’t turn
- Starts then stops
- Burnt rubber smell
Safe Checks You Can Try
- Power‑cycle, ensure door closes firmly
Stop Using If:
burning smell or smoke
Pricing & Time to Fix
| Repair Type | Price Range |
|---|---|
| Belt & idler pulley | $150–$300 |
| Drum motor | $250–$450 |
Parts + labor. Informational only—not a binding quote.
$59 diagnostic — credited toward repair if you approve.
Typical Fix Time
45–120 min
Common Parts
belt, idler pulley, motor
$59 diagnostic — FREE with repair
Usually same‑ or next‑day service
Brands We Service
Our technicians are trained and experienced with all major appliance brands
Whirlpool
Maytag
Samsung
LG
Ready When You Need Us
Usually same‑ or next‑day service
Fast Response
Most repairs completed in a single visit
90-Day Warranty
All parts and labor covered
Upfront Pricing
Written quote before we start
Frequently Asked Questions
Frequently Asked Questions
A humming motor with a stationary drum almost always means the drive belt has snapped. The motor runs but has no belt to turn the drum. Less commonly, the idler pulley has seized or the drum rollers are stuck. Our tech can usually replace the belt and get the dryer spinning again in under an hour.
It's technically possible but requires disassembling the dryer cabinet and correctly routing the belt around the drum, motor pulley, and idler pulley. If the belt broke because of a worn idler or roller, those should be replaced at the same time. Our techs replace all wear items together to avoid a repeat failure.
A slow-turning drum points to a slipping belt, a worn motor pulley, or seized drum rollers creating friction. The motor has to work harder, which can lead to motor failure if left unaddressed. Our $59 diagnostic identifies the restriction and gives you a flat-rate quote.