5.0 rating • 1,400+ customers served
Dryer Not Heating Repair in Los Angeles
Same-day service available | $59 diagnostic — FREE with repair | 90-day warranty
90-Day Fix GuaranteeSame issue? We come back free.
What Our Customers Say
5.0•1,400+ customers served
"Found the blower wheel was cracked and wobbling. Replaced it and airflow improved dramatically. Couldn't be happier with the service."
JM
Justin M.
Los Angeles
"Found the drum glides were worn smooth causing a scraping noise. Replaced all the glides. Will definitely call them again."
CW
Chris W.
Los Angeles
"Replaced a faulty door switch that was cutting power mid-cycle. Honest and upfront about everything."
DW
David W.
Los Angeles
What's Happening & What to Do Now
Common Symptoms
- Drum spins but air is cold
- Takes 2–3 cycles to dry
- Burnt smell or tripped breaker
Safe Checks You Can Try
- Clean lint screen and check vent for blockage
- Verify cycle not on 'air fluff'
Stop Using If:
you smell burning, see smoke, or the cabinet becomes excessively hot
Pricing & Time to Fix
| Repair Type | Price Range |
|---|---|
| Heating element (electric) | $150–$350 |
| Thermal fuse / thermostat | $75–$300 |
| Gas igniter | $100–$250 |
Parts + labor. Informational only—not a binding quote.
$59 diagnostic — credited toward repair if you approve.
Typical Fix Time
45–120 min
Common Parts
heating element, thermal fuse, igniter (gas)
$59 diagnostic — FREE with repair
Usually same‑ or next‑day service
Brands We Service
Our technicians are trained and experienced with all major appliance brands
Whirlpool
Maytag
Samsung
LG
GE
Kenmore
Ready When You Need Us
Usually same‑ or next‑day service
Fast Response
Most repairs completed in a single visit
90-Day Warranty
All parts and labor covered
Upfront Pricing
Written quote before we start
Frequently Asked Questions
Frequently Asked Questions
The most common causes are a blown thermal fuse, a burned-out heating element, or failed gas valve coils (gas dryers). A blown thermal fuse is almost always caused by a restricted exhaust vent — so the fix should include checking the vent, not just replacing the fuse. Our $59 diagnostic covers the full heating circuit and vent check.
Absolutely. A restricted vent causes the dryer to overheat internally, which blows the thermal fuse — a safety device that cuts power to the heating circuit. Our tech replaces the fuse and checks the vent condition so the new fuse doesn't blow again. Vent cleaning can be done during the same visit.
Running a dryer without heat won't cause immediate danger, but if the cause is a restricted vent, continued use could be a fire hazard. And drying clothes without heat takes much longer, which puts extra wear on the drum, motor, and belt. Better to fix the root cause than to work around it.