5.0 rating • 1,400+ customers served
Dishwasher Not Cleaning Repair in Los Angeles
Same-day service available | $59 diagnostic — FREE with repair | 90-day warranty
90-Day Fix GuaranteeSame issue? We come back free.
What Our Customers Say
5.0•1,400+ customers served
"Identified a bad water inlet valve causing slow fills. Replaced it and cycles run at full water pressure. Highly recommend TruePro."
DW
David W.
Los Angeles
"Identified a failing turbidity sensor. Replaced it and the auto-cycle adjusts properly now. Excellent work, very thorough."
JT
Jeff T.
Los Angeles
"Replaced a faulty wash motor that was making a grinding noise. Dishes come out clean again. So glad we found them."
NE
Natalie E.
Los Angeles
What's Happening & What to Do Now
Common Symptoms
- Residue on dishes post cycle
- Soap door not opening
- Spray arms clogged
Safe Checks You Can Try
- Clean filter and spray arms
- Use high‑temp cycle to test
- Run with dishwasher cleaner
Stop Using If:
heater or wiring shows burn marks
Pricing & Time to Fix
| Repair Type | Price Range |
|---|---|
| Spray arm service/replacement | $100–$220 |
| Wash motor / circulation pump | $300–$500 |
Parts + labor. Informational only—not a binding quote.
$59 diagnostic — credited toward repair if you approve.
Typical Fix Time
45–120 min
Common Parts
spray arms, wash motor, circulation pump
$59 diagnostic — FREE with repair
Usually same‑ or next‑day service
Brands We Service
Our technicians are trained and experienced with all major appliance brands
Bosch
Whirlpool
KitchenAid
GE
Ready When You Need Us
Usually same‑ or next‑day service
Fast Response
Most repairs completed in a single visit
90-Day Warranty
All parts and labor covered
Upfront Pricing
Written quote before we start
Frequently Asked Questions
Frequently Asked Questions
Clogged spray arms, a weak wash motor, or low water pressure from a failing inlet valve are the most common causes. Hard water mineral buildup can also block the tiny holes in the spray arms. Our $59 diagnostic inspects the wash system and water fill to find the exact issue — the fee is waived with repair.
A hotter setting might help slightly, but it won't fix a clogged spray arm or a weak pump. If the water isn't reaching the dishes properly, more heat just wastes energy. Get the underlying mechanical issue diagnosed so the machine can clean effectively on any cycle.
It does. Mineral deposits build up inside spray arms, on heating elements, and throughout the wash cavity. Over time, this reduces spray pressure and water flow. Running a monthly dishwasher cleaner and using a rinse aid helps. If the buildup is severe, our tech can clean the internal components during a service visit.