Available Today!•877-378-3111for Same-Day Service

5.0 rating • 1,400+ customers served

Dishwasher Not Draining Repair in Culver City

Same-day service available | $59 diagnostic — FREE with repair | 90-day warranty

90-Day Fix GuaranteeSame issue? We come back free.

✓ Same-day appointments available✓ OEM parts on truck

Between the studio lots and the old-town restaurants, Culver City's residential streets hold a dense mix of 1940s duplexes, postwar ranches, and the sleek new townhome complexes filling in along Jefferson and Washington. When it comes to dishwasher repair, a dishwasher not draining is one of the most common calls we get from homeowners here. TruePro's technicians arrive in Culver City with fully stocked vans so most repairs are completed on the first visit.

What Our Customers Say

5.0•1,400+ customers served

See reviews on Yelp →See reviews on Nextdoor →

"Found the door latch assembly was worn out. Replaced it and the door seals properly now. Excellent work, very thorough."

Luis G.

Culver City

1 month ago

"Found the drain pump was clogged with broken glass. Cleared it out and the dishwasher drains perfectly. So glad we found them."

Sean D.

Culver City

3 days ago

"Found the float switch was stuck, preventing water from filling. Cleaned and freed the mechanism. Five stars, no hesitation."

David W.

Culver City

2 months ago

What's Happening & What to Do Now

Common Symptoms

Standing water at bottom after cycle
Buzzing from base but no drain
Dishes stay dirty / gritty

Safe Checks You Can Try

Clean filter and check air gap
Ensure drain hose high loop is present
Run a reset per manual

Stop Using If:

you see leaking from the base or smell electrical burning

Pricing & Time to Fix

Repair Type	Price Range
Drain pump replacement	$100–$400
Drain hose / clog clear	$80–$180
Main motor & pump assembly	$350–$500

Parts + labor. Informational only—not a binding quote.

$59 diagnostic — credited toward repair if you approve.

Typical Fix Time

45–90 min

Common Parts

drain pump, drain hose, control board (rare)

$59 diagnostic — FREE with repair

Usually same‑ or next‑day service

Brands We Service

Our technicians are trained and experienced with all major appliance brands

Bosch

Whirlpool

KitchenAid

Samsung

Frigidaire

Maytag

Ready When You Need Us

Usually same‑ or next‑day service

Fast Response

Most repairs completed in a single visit

90-Day Warranty

All parts and labor covered

Upfront Pricing

Written quote before we start

Call (877) 378-3111 Text Us

Frequently Asked Questions

A clogged drain pump, a kinked drain hose, or a blocked air gap are the most common causes. Food debris and small objects frequently clog the drain pump filter. Our tech inspects the full drain path during the $59 diagnostic — waived with repair — and clears or replaces the failed component on the spot.

Yes. Use towels or a wet-dry vac to soak up the water. Then check the drain filter at the bottom of the tub — it's often accessible by hand and may have food debris blocking it. If clearing the filter doesn't solve the problem, the drain pump or hose likely needs professional attention.

It's not dangerous, but standing water will become stagnant and smelly, and the dishwasher won't clean properly if old water is sitting in the tub at the start of each cycle. The problem usually worsens over time as the clog builds, so it's best to get it fixed sooner.