5.0 rating • 1,400+ customers served

How Much Does Washer Repair Cost in Ventura County?

$125 – $550 average • $59 diagnostic — FREE with repair

90-Day Fix GuaranteeSame issue? We come back free.

✓ Same-day appointments available✓ OEM parts on truck

What Our Customers Say

5.0•1,400+ customers served

See reviews on Yelp →See reviews on Nextdoor →

"I am so happy with the services provided by TruePro Home Services! I have a very old oven that I truly believed would need to be replaced. But, Yury came on time, diagnosed the issues, and had the parts with him to do the repair the same day. My oven is now in perfect working order. Highly recommend!"

Jill W.

Thousand Oaks

3 weeks ago

"Our LG Front Loading washer wasn't draining. I contacted Simon the next day. He had the part on his truck and came by within 30 minutes, and had it up and running super fast! Thank you Simon for your punctuality, honesty and great value. See you next time!"

Julia M.

Oxnard

1 week ago

"Wonderful and top notched care! They were able to meet my same day expectation to get a washer and dryer hooked up in a new house. He was attentive, thoughtful and explained it all as well. I would highly recommend their service!"

Aleema B.

Simi Valley

2 months ago

Same-day availability

90-day warranty

OEM parts on truck

5-star rated

$125 – $550

Average repair cost

Most washer repairs in Ventura County cost between $125 and $550. The exact price depends on the failure, your machine type, and whether hard water has accelerated the damage. Ventura County's agricultural water supply hits washers hard. Mineral deposits build up inside inlet valves, drain pumps, and hoses. Homes in Oxnard, Camarillo, and rural areas on well water see washer components wear out 20-30% faster than homes with softened municipal water. Front-load washers cost more to repair than top-loaders because accessing internal components takes longer. Labor rates in Ventura County run $90-$130 per hour.

Repair Cost Breakdown

Repair	Cost Range	Notes
Drain pump replacement	$150-$300	The washer will not drain or makes a grinding noise during the spin cycle. Pump costs $30-$80. Hard water sediment and debris are the usual culprits in Ventura County.
Water inlet valve replacement	$120-$250	Controls hot and cold water flow into the drum. Mineral buildup from hard water clogs these valves. Part runs $20-$60.
Door boot seal replacement (front-load)	$175-$350	Mold and tearing cause leaks around the door. The rubber boot costs $60-$150 and takes about an hour to install.
Drive belt replacement	$100-$200	The drum spins slowly or not at all. Belt costs $10-$30 but the job requires partial disassembly.
Bearing and seal kit replacement	$300-$550	Loud rumbling during spin means the bearings are gone. This is a labor-intensive repair. On front-loaders, the tub has to come apart.
Control board replacement	$200-$450	The washer stops mid-cycle, displays error codes, or buttons stop responding. Boards cost $100-$300 for the part.
Lid switch or door latch replacement	$100-$200	The washer will not start because the safety switch does not detect a closed lid or door. Simple repair, usually under an hour.
Shock absorber or suspension spring replacement	$150-$280	Excessive vibration and banging during spin cycles. Front-loaders use shock absorbers; top-loaders use suspension springs.

Drain pump replacement: The washer will not drain or makes a grinding noise during the spin cycle. Pump costs $30-$80. Hard water sediment and debris are the usual culprits in Ventura County.

Water inlet valve replacement: Controls hot and cold water flow into the drum. Mineral buildup from hard water clogs these valves. Part runs $20-$60.

Door boot seal replacement (front-load): Mold and tearing cause leaks around the door. The rubber boot costs $60-$150 and takes about an hour to install.

Drive belt replacement: The drum spins slowly or not at all. Belt costs $10-$30 but the job requires partial disassembly.

Bearing and seal kit replacement: Loud rumbling during spin means the bearings are gone. This is a labor-intensive repair. On front-loaders, the tub has to come apart.

Control board replacement: The washer stops mid-cycle, displays error codes, or buttons stop responding. Boards cost $100-$300 for the part.

Lid switch or door latch replacement: The washer will not start because the safety switch does not detect a closed lid or door. Simple repair, usually under an hour.

Shock absorber or suspension spring replacement: Excessive vibration and banging during spin cycles. Front-loaders use shock absorbers; top-loaders use suspension springs.

Factors That Affect Cost

Hard water and well water damage

Ventura County homes with hard water or well water see faster wear on inlet valves, pumps, and hoses. Mineral deposits restrict water flow and cause components to overheat. A water softener adds upfront cost but extends washer life by years.

Washer type (front-load vs. top-load)

Front-load washers cost 20-40% more to repair. Bearing replacements require tub disassembly. Door boot seals are unique to front-loaders. Top-load agitator repairs are simpler and cheaper.

Brand and parts sourcing

LG and Samsung parts sometimes need to be ordered and can take 3-5 days. Whirlpool and Maytag parts are widely stocked. Speed Queen and Miele carry premium parts pricing.

Age and condition of the machine

Washers over 8 years old in hard water areas often have multiple worn components. Fixing one part may reveal another failure behind it.

Service location

Ventura County spans from coastal Oxnard to inland Fillmore. Most service areas have no extra trip charge, but remote agricultural locations may add $20-$40 to the total.

Gas vs. electric dryer pairing

This does not affect the washer itself, but if you are repairing both a washer and dryer on the same visit, you save on the diagnostic fee. Bundle service when possible.

Repair vs. Replace

A washer lasts 8-14 years with normal use. Hard water can shave 2-3 years off that lifespan if you skip maintenance.

✅ Repair when…

•The machine is under 7 years old
•The repair is a single component like a pump, valve, or belt
•The total cost stays below $350
•The drum and bearings are still in good condition

❌ Replace when…

•Bearing replacement is needed on a unit over 8 years old
•The drum has visible rust or cracks
•Hard water has damaged multiple internal components
•Repair costs exceed 50% of a new washer's price

The 50% Rule

If the repair bill exceeds half the cost of a new washer with similar features, replace it. For hard water households, lean toward replacing sooner because hidden mineral damage often means more failures within a year.

How TruePro Pricing Works

TruePro's $59 diagnostic fee covers the inspection and gets credited toward the repair if you approve the quote. All work comes with a 90-day warranty on parts and labor. No hidden fees. You see the full price in writing before the technician picks up a tool. New customers get 15% off labor with code NEW15. Same-day appointments are often available across Ventura County. Call 877-378-3111. CA License #51112.

Washer Repair Cost — FAQ

Yes. Hard water leaves calcium and mineral deposits inside inlet valves, drain pumps, and hoses. Over time, those deposits restrict water flow and cause parts to fail prematurely. Homes on well water in rural Ventura County areas are hit the hardest. Installing a water softener or adding a sediment filter to the washer supply line reduces the damage significantly.

Between $175 and $350 in most cases. The door boot seal is the most common source of leaks on front-load washers. The rubber seal costs $60-$150 for the part, and installation takes about an hour at Ventura County labor rates.

Top-load washers are almost always cheaper to repair. The internal layout is simpler and parts are easier to access. Front-load bearing replacements cost $300-$550 because the entire tub must be disassembled. The same repair on a top-loader runs $200-$350.

Most repairs take 45 minutes to 2 hours on-site. Simple fixes like a lid switch or belt replacement finish in under an hour. Bearing replacements on front-loaders can take 2-3 hours. TruePro offers same-day service for most Ventura County zip codes.

It depends on the repair. A $150 pump replacement is worth it. A $500 bearing job on a 10-year-old machine is not. The general rule: if the repair exceeds half the cost of a new washer, replace it. In hard water areas, lean toward replacing because mineral damage tends to cause cascading failures.

Related Cost Guides

Washer Repair Cost Dryer Repair Cost Ventura County Appliance Repair Cost Ventura County

Washer Repair Service →Ventura County →Oxnard →Camarillo →All Repair Costs →

Ready to get your appliance fixed?

Book online in minutes or call for same-day availability.

Call 877-378-3111

90-day warranty • Upfront pricing • No hidden fees